Bug#651579: wiki.debian.org: device configuration page is outdated

This is an automatic notification regarding your Bug report
which was filed against the wiki.debian.org package:

#651579: wiki.debian.org: device configuration page is outdated

It has been closed by Paul Wise .

Their explanation is attached below along with your original report.
If this explanation is unsatisfactory and you have not received a
better one in a separate message then please contact Paul Wise by
replying to this email.


651579: http://bugs.debian.org/cgi-bin/bugr...i?buge1579
Debian Bug Tracking System
Contact with problems


- Forwarded message -
From: Paul Wise
To: 
Date: Sat, 10 Dec 2011 14:06:43 +0800
Subject: BTS is not for user support
The Debian bug tracking system is not for user support, please contact
one of our support channels if you want support:

http://www.debian.org/support

bye,
pabs

http://wiki.debian.org/PaulWise


- Forwarded message -
From: gabriel b
To: Debian Bug Tracking System
Date: Fri, 09 Dec 2011 21:57:09 -0800
Subject: wiki.debian.org: device configuration page is outdated
Package: wiki.debian.org
Severity: normal

http://wiki.debian.org/rtl819x

this page have a lot of manual instructions for Wheezy. I installed the net
install image for this week and it worked out of the box.

And the instructions for Squeeze did not work.

it worked until step 5. `modprobe r8192_pci`. that didn't load any module or
gave me any error.



05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE
802.11b/g/n WiFi Adapter (rev 01)
       Subsystem: Realtek Semiconductor Co., Ltd. Device 8195
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 32 bytes
       Interrupt: pin A routed to IRQ 11
       Region 0: I/O ports at 2000 [size%6]
       Region 2: Memory at f0900000 (64-bit, non-prefetchable) [sizeK]
       Capabilities: [40] Power Management version 3
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent75mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
               Address: 0000000000000000  Data: 0000
       Capabilities: [70] Express (v2) Endpoint, MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns,
L1 <64us
                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                       MaxPayload 128 bytes, MaxReadReq 512 bytes
               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <512ns, L1 <64us
                       ClockPM+ Surprise- LLActRep- BwNot-
               LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                       ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
               DevCap2: Completion Timeout: Not Supported, TimeoutDis+
               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-, Selectable De-emphasis: -6dB
                        Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
                        Compliance De-emphasis: -6dB
               LnkSta2: Current De-emphasis Level: -6dB
       Capabilities: [100 v1] Advanced Error Reporting
               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
               CESta:  RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
               AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
       Capabilities: [140 v1] Virtual Channel
               Caps:   LPEVC=0 RefClk0ns PATEntryBits=1
               Arb:    Fixed- WRR32- WRR64- WRR128-
               Ctrl:   ArbSelect=Fixed
               Status: InProgress-
               VC0:    Caps:   PATOffset MaxTimeSlots=1 RejSnoopTrans-
                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                       Status: NegoPending- InProgress-
       Capabilities: [160 v1] Device Serial Number 01-91-81-fe-ff-4c-e0-00



Debian Release: 6.0.3
 APT prefers stable
 APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

i can't edit the page to fix it.