Bug#656433: linux-image-3.1.0-1-amd64: Thinkpad X220 fails to wake up after hibernate-ram with kernel >3.1.5

January 19th, 2012 - 05:40 am ET by Paul Seyfert | Report spam
Package: linux-2.6
Version: 3.1.5-1
Severity: important

Dear Maintainer,

* What led up to the situation?
I upgraded from linux-image-3.1.0-1-amd64__3.1.5-1_amd64 to linux-
image-3.1.0-1-amd64_3.1.6-1_amd64 (tried linux-
image-3.1.0-1-amd64_3.1.8-1_amd64 and self compiled 3.2.1 from kernel.org as
well)

* What exactly did you do (or not do) that was effective (or
ineffective)?
I suspended my system with hibernate-ram. Opening the notebook later did not
return me to my session (as desired). Instead after ~1 second I see the power
LED turning off and hear the harddrive spin down. ~1 further second later, all
LED light up (like they do if I turn the system on), the harddrive spins up
shortly until everything shuts down again. Seems like the system is in a loop
of turning on and off again every 2 seconds.

The only way I found to exit this loop was removing the power supply and the
battery (power button did not help).
After downgrading to 3.1.5 the system wakes up as it should.




** Version:
Linux version 3.1.0-1-amd64 (Debian 3.1.5-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-7) ) #1 SMP Sun Dec 11 20:36:41 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=UUID=ebc375e1-477a-47ad-9cf9-eac4af133429 ro quiet

** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.

** Kernel log:
[ 4.269061] Registered led device: tpacpi::thinklight
[ 4.269107] Registered led device: tpacpi::power
[ 4.269130] Registered led device: tpacpi::standby
[ 4.269155] Registered led device: tpacpi::thinkvantage
[ 4.269251] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 4.269340] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.270665] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 4.292429] iwlagn 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
[ 4.292932] Registered led device: phy0-led
[ 4.302262] Linux media interface: v0.10
[ 4.303959] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.305015] Linux video capture interface: v2.00
[ 4.306773] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[ 4.308460] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
[ 4.308589] usbcore: registered new interface driver uvcvideo
[ 4.308592] USB Video Class driver (1.1.1)
[ 5.067992] Synaptics Touchpad, model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
[ 5.067999] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 5.118033] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 5.297619] fbcon: inteldrmfb (fb0) is primary device
[ 5.645907] Console: switching to colour frame buffer device 160x48
[ 5.648884] fb0: inteldrmfb frame buffer device
[ 5.648885] drm: registered panic notifier
[ 5.651366] acpi device:01: registered as cooling_device4
[ 5.651494] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 5.651557] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 5.651626] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.651674] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.651732] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 5.651762] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6.189378] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 6.192024] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 6.192359] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 6.192693] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 6.195093] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.195158] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.195217] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.413647] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 6.652564] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 6.669736] loop: module loaded
[ 8.007313] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 8.069386] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.157080] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 8.838604] RPC: Registered named UNIX socket transport module.
[ 8.838606] RPC: Registered udp transport module.
[ 8.838608] RPC: Registered tcp transport module.
[ 8.838609] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.845684] FS-Cache: Loaded
[ 8.856781] FS-Cache: Netfs 'nfs' registered for caching
[ 8.862096] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.897532] fuse init (API version 7.17)
[ 9.165402] Disabling lock debugging due to kernel taint
[ 9.165407] openafs: module license 'http://www.openafs.org/dl/license10.html' taints kernel.
[ 9.260809] vboxdrv: Found 4 processor cores.
[ 9.261287] vboxdrv: fAsync=0 offMin=0x100 offMax=0x1564
[ 9.261341] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 9.261343] vboxdrv: Successfully loaded version 4.1.8 (interface 0x00190000).
[ 9.276716] enabling dynamically allocated vcaches
[ 9.276718] Starting AFS cache scan...
[ 9.471928] vboxpci: IOMMU not found (not registered)
[ 9.854893] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 9.910644] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 9.911118] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.937341] Bluetooth: Core ver 2.16
[ 9.937363] NET: Registered protocol family 31
[ 9.937365] Bluetooth: HCI device and connection manager initialized
[ 9.937367] Bluetooth: HCI socket layer initialized
[ 9.937369] Bluetooth: L2CAP socket layer initialized
[ 9.937373] Bluetooth: SCO socket layer initialized
[ 9.943703] Bluetooth: RFCOMM TTY layer initialized
[ 9.943707] Bluetooth: RFCOMM socket layer initialized
[ 9.943708] Bluetooth: RFCOMM ver 1.11
[ 9.964963] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.964966] Bluetooth: BNEP filters: protocol multicast
[ 9.997263] lp: driver loaded but no devices found
[ 9.999250] ppdev: user-space parallel port driver
[ 10.261238] found 1836 non-empty cache files (11%).
[ 11.461845] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 11.461849] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 11.462588] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.805307] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 11.867284] [drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync)
[ 12.073264] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[ 14.656672] e1000e 0000:00:19.0: PCI INT A disabled
[ 14.656685] e1000e 0000:00:19.0: PME# enabled
[ 16.308048] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf2500000-0xf251ffff] (PCI address [0xf2500000-0xf251ffff])
[ 16.308054] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf252b000-0xf252bfff] (PCI address [0xf252b000-0xf252bfff])
[ 16.308059] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f])
[ 16.308072] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 16.308089] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 16.308114] e1000e 0000:00:19.0: PME# disabled
[ 16.308175] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 16.653426] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0
[ 16.729807] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 16.907626] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 17.360133] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 18.019048] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 18.019053] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 21.643975] eth0: no IPv6 routers present
[ 335.104610] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, -vsync)

** Model information
sys_vendor: LENOVO
product_name: 4290W1B
product_version: ThinkPad X220
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 8DET47WW (1.17 )
board_vendor: LENOVO
board_name: 4290W1B
board_version: Not Available

** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
pci_stub
vboxpci^@(O)
vboxnetadp^@(O)
vboxnetflt^@(O)
vboxdrv^@(O)
acpi_cpufreq
mperf
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
openafs^@(P)
cpufreq_powersave
binfmt_misc
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
loop
snd_hda_codec_hdmi
snd_hda_codec_conexant
joydev
uvcvideo
videodev
media
arc4
v4l2_compat_ioctl32
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
thinkpad_acpi
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
snd_seq
snd_timer
i915
iwlagn
snd_seq_device
drm_kms_helper
drm
mac80211
psmouse
i2c_algo_bit
cfg80211
serio_raw
pcspkr
evdev
i2c_i801
snd
battery
i2c_core
iTCO_wdt
rfkill
iTCO_vendor_support
tpm_tis
snd_page_alloc
soundcore
tpm
tpm_bios
nvram
ac
power_supply
wmi
video
button
processor
ext4
mbcache
jbd2
crc16
sd_mod
crc_t10dif
usbhid
hid
sdhci_pci
sdhci
mmc_core
ahci
ehci_hcd
libahci
libata
usbcore
e1000e
scsi_mod
thermal
thermal_sys

** Network interface configuration:

auto lo
iface lo inet loopback

allow-hotplug eth0

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether f0:de:f1:59:2f:e2 brd ff:ff:ff:ff:ff:ff
inet 128.141.130.206/16 brd 128.141.255.255 scope global eth0
inet6 fe80::f2de:f1ff:fe59:2fe2/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether a0:88:b4:33:93:3c brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 36880 463 0 0 0 0 0 0 36880 463 0 0 0 0 0 0
eth0: 3464272392 2325515 0 0 0 0 0 17411 84981201 1165406 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

*** Protocol statistics:
Ip:
1205385 total packets received
479 with invalid addresses
0 forwarded
0 incoming packets discarded
1204555 incoming packets delivered
1165805 requests sent out
80 outgoing packets dropped
8 dropped because of missing route
57 reassemblies required
19 packets reassembled ok
Icmp:
178 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 177
echo requests: 1
182 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 182
IcmpMsg:
InType3: 177
InType8: 1
OutType3: 182
Tcp:
1662 active connections openings
1 passive connection openings
10 failed connection attempts
456 connection resets received
19 connections established
1178253 segments received
1161187 segments send out
228 segments retransmited
0 bad segments received.
548 resets sent
Udp:
15007 packets received
182 packets to unknown port received.
0 packet receive errors
4194 packets sent
UdpLite:
TcpExt:
322 TCP sockets finished time wait in fast timer
8 packets rejects in established connections because of timestamp
1004 delayed acks sent
1 delayed acks further delayed because of locked socket
Quick ack mode was activated 1080 times
21 packets directly queued to recvmsg prequeue.
2 bytes directly received in process context from prequeue
1159975 packet headers predicted
2861 acknowledgments not containing data payload received
26356 predicted acknowledgments
3 times recovered from packet loss by selective acknowledgements
3 congestion windows recovered without slow start after partial ack
2 TCP data loss events
8 timeouts after SACK recovery
3 fast retransmits
1 retransmits in slow start
76 other TCP timeouts
1086 DSACKs sent for old packets
5 DSACKs received
20 connections reset due to unexpected data
433 connections reset due to early user close
7 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 2
TCPSackMerged: 11
TCPSackShiftFallback: 16
IpExt:
InMcastPkts: 12812
OutMcastPkts: 174
InBcastPkts: 11190
InOctets: -931636200
OutOctets: 64022488
InMcastOctets: 2829561
OutMcastOctets: 25504
InBcastOctets: 1359758


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Lenovo Device [17aa:21da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:21da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size%6M]
Region 4: I/O ports at 5000 [sized]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Lenovo Device [17aa:21da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f2525000 (64-bit, non-prefetchable) [size]
Capabilities: <access denied>

00:16.3 Serial controller [0700]: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller [8086:1c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Lenovo Device [17aa:21da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 50b0 [size=8]
Region 1: Memory at f252c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
Subsystem: Lenovo Device [17aa:21ce]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f2500000 (32-bit, non-prefetchable) [size8K]
Region 1: Memory at f252b000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 5080 [size2]
Capabilities: <access denied>
Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f252a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Lenovo Device [17aa:21da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f2520000 (64-bit, non-prefetchable) [sizeK]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary, secondary, subordinate, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary, secondary, subordinate, sec-latency=0
Memory behind bridge: f2400000-f24fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary, secondary, subordinate=0c, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f1c00000-f23fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f1400000-f1bfffff
Prefetchable memory behind bridge: 00000000f0c00000-00000000f13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2529000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04)
Subsystem: Lenovo Device [17aa:21da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:21da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at 50a8 [size=8]
Region 1: I/O ports at 50bc [size=4]
Region 2: I/O ports at 50a0 [size=8]
Region 3: I/O ports at 50b8 [size=4]
Region 4: I/O ports at 5060 [size2]
Region 5: Memory at f2528000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Lenovo Device [17aa:21da]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f2524000 (64-bit, non-prefetchable) [size%6]
Region 4: I/O ports at efa0 [size2]
Kernel driver in use: i801_smbus

03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [8086:0085] (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn

0d:00.0 System peripheral [0880]: Ricoh Co Ltd Device [1180:e823] (rev 07) (prog-if 01)
Subsystem: Lenovo Device [17aa:21da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f1400000 (32-bit, non-prefetchable) [size%6]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 004: ID 04f2:b217 Chicony Electronics Co., Ltd
Bus 002 Device 003: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)


Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.1.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to de_DE.UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.1.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1

Versions of packages linux-image-3.1.0-1-amd64 recommends:
ii firmware-linux-free 3

Versions of packages linux-image-3.1.0-1-amd64 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.1 <none>

Versions of packages linux-image-3.1.0-1-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi 0.34
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn xen-hypervisor <none>

linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64: false
linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64: true
* linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64:




To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
email Follow the discussionReplies 3 repliesReplies Make a reply

Similar topics

Replies

#1 Jonathan Nieder
January 19th, 2012 - 06:00 am ET | Report spam
Hi,

Paul Seyfert wrote:

I suspended my system with hibernate-ram. Opening the notebook later did not
return me to my session (as desired). Instead after ~1 second I see the power
LED turning off and hear the harddrive spin down. ~1 further second later, all
LED light up (like they do if I turn the system on), the harddrive spins up
shortly until everything shuts down again. Seems like the system is in a loop
of turning on and off again every 2 seconds.

The only way I found to exit this loop was removing the power supply and the
battery (power button did not help).
After downgrading to 3.1.5 the system wakes up as it should.



Can you bisect? It works like this:

0. Install relevant tools: apt-get install git build-essential

1. Grab the stable kernel.

git clone -o stable \
git://git.kernel.org/pub/scm/linux/...stable.git \
linux

If you already have a clone of Linus's tree, just add the relevant
branches to it instead.

cd linux
git remote add -f stable \
git://git.kernel.org/pub/scm/linux/...stable.git

2. Make sure you can reproduce the bug with v3.1.6.

git checkout v3.1.6
cp /boot/config-$(uname -r) .config; # current configuration
make localmodconfig; # optional, minimize configuration
make deb-pkg; # add -j<num> to speed up by using multiple CPUs
dpkg -i ../<name of package>; reboot; test test test

3. Make sure you can reproduce the lack of bug with v3.1.5.

git checkout v3.1.5
make silentoldconfig; # reuse configuration
make deb-pkg; # optionally with -j<num>
dpkg -i ../<name of package>; reboot; test test test

4. If v3.1.6 reproduced the problem and v3.1.5 did not, record that:

git bisect start
git bisect good v3.1.5
git bisect bad v3.1.6

Git checks out a revision halfway between to test.

make silentoldconfig; # reuse configuration
make deb-pkg
dpkg -i ../<name of package>; reboot; test test test
cd ~/src/linux
git bisect bad; # if it reproduces the problem
git bisect good; # if suspend-to-ram works fine
git bisect skip; # if some other problem makes it hard to test

5. Git checks out a revision halfway between to test. Rinse and
repeat until it finds the "first bad commit" or until bored.

At any step you can run "git bisect visualize" if the gitk package
is installed to see the regression range narrowing. Even a few
rounds can be very helpful in narrowing down which patch introduced
the bug; one way to report partial results is to send "git bisect log"
output.

I'd also be interested in full "dmesg" output from booting an affected
kernel and booting and suspending an unaffected one. By the way, is
this reproducible without the virtualbox driver?

Thanks for reporting.

Sincerely,
Jonathan



To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Replies Reply to this message
#2 Jonathan Nieder
January 24th, 2012 - 03:20 am ET | Report spam
Paul Seyfert wrote:

* meanwhile: I find openafs is not working (probably some months
already). Hasn't been rebuilt with any 3.1.* kernel
* I reinstall openafs, afs working.
* I find time to bisect. upgrade to 3.1.6 (no bug)

so my best naive guess is that the 3.1.6 has problems waking up if the
openafs module is in a broken state?



Sounds believable to me. But shouldn't module versioning have caught
this and prevented the out-of-date openafs module from loading in the
first place?



To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Replies Reply to this message
#3 Paul Seyfert
January 24th, 2012 - 03:40 am ET | Report spam
Hi,

Am 19.01.2012 11:52, schrieb Jonathan Nieder:
2. Make sure you can reproduce the bug with v3.1.6.



I'm quite surprised I fail here. Independent of whether I install the
selfmade 3.1.6 or the version from the debian mirror.

I went through the things I changed on my system since the last
occurrence of the bug:

* 3.1.6 (bug present)
* downgrade to 3.1.5 (bug gone)
* bugreport
* meanwhile: I find openafs is not working (probably some months
already). Hasn't been rebuilt with any 3.1.* kernel
* I reinstall openafs, afs working.
* I find time to bisect. upgrade to 3.1.6 (no bug)

so my best naive guess is that the 3.1.6 has problems waking up if the
openafs module is in a broken state?

Cheers,
Paul



To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
email Follow the discussion Replies Reply to this message
Help Create a new topicReplies Make a reply
Search Make your own search