[PATCH 2/2] HID: wacom: Add serial and id reporting for Wacom Intuos4 WL

This patch implements reporting id and serial number of used tool.
Reported values are the same as for USB on of the driver for wacom Intuos4 WL

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>

drivers/hid/hid-wacom.c | 21 +++++++++++++++
1 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index a793753..49b9178 100644
a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -35,6 +35,8 @@ struct wacom_data {
__u16 tool;
unsigned char butstate;
__u8 features;
+ __u32 id;
+ __u32 serial;
unsigned char high_speed;
#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
int battery_capacity;
@@ -318,26 +320,30 @@ static void wacom_i4_parse_pen_report(struct wacom_data *wdata,
struct input_dev *input, unsigned char *data)
{
__u16 x, y, pressure;
- __u32 id;

switch (data[1]) {
case 0x80: /* Out of proximity report */
input_report_key(input, BTN_TOUCH, 0);
input_report_abs(input, ABS_PRESSURE, 0);
input_report_key(input, wdata->tool, 0);
+ input_report_abs(input, ABS_MISC, 0);
+ input_event(input, EV_MSC, MSC_SERIAL, wdata->serial);
wdata->tool = 0;
input_sync(input);
break;
case 0xC2: /* Tool report */
- id = ((data[2] << 4) | (data[3] >> 4) |
+ wdata->id = ((data[2] << 4) | (data[3] >> 4) |
((data[7] & 0x0f) << 20) |
- ((data[8] & 0xf0) << 12)) & 0xfffff;
+ ((data[8] & 0xf0) << 12));
+ wdata->serial = ((data[3] & 0x0f) << 28) +
+ (data[4] << 20) + (data[5] << 12) +
+ (data[6] << 4) + (data[7] >> 4);

- switch (id) {
- case 0x802:
+ switch (wdata->id) {
+ case 0x100802:
wdata->tool = BTN_TOOL_PEN;
break;
- case 0x80A:
+ case 0x10080A:
wdata->tool = BTN_TOOL_RUBBER;
break;
}
@@ -356,6 +362,9 @@ static void wacom_i4_parse_pen_report(struct wacom_data *wdata,
input_report_abs(input, ABS_X, x);
input_report_abs(input, ABS_Y, y);
input_report_abs(input, ABS_PRESSURE, pressure);
+ input_report_abs(input, ABS_MISC, wdata->id);
+ input_event(input, EV_MSC, MSC_SERIAL, wdata->serial);
+ input_report_key(input, wdata->tool, 1);
input_sync(input);
break;
}
1.7.6.4

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/