[PATCH v5 0/3] Input: Cypress TTSP device driver

October 08th, 2011 - 02:40 pm ET by Javier Martinez Canillas | Report spam
Cypress TrueTouch(tm) Standard Product controllers are found in
a wide range of embedded devices. This patch-set adds support for a
variety of TTSP controllers.

The original author of the driver is Kevin McNeely <kev@cypress.com>

Since the hardware is capable of tracking identifiable contacts and the
original driver used multi-touch protocol type A (stateless), I've added
multi-touch protocol type B (stateful) support.

The driver is composed of a core driver that process the data sent by
the contacts (fingers) and two bus specific interface modules (I2C and SPI).

This is a fifth version of the driver that fixes issues called out by
Dmitry Torokhov, Henrik Rydberg and Mohan Pallaka and Kevin McNeely.

The patchset is composed of the patches:

[PATCH v5 1/3] Input: cyttsp - Cypress TTSP capacitive multi-touch screen support
[PATCH v5 2/3] Input: cyttsp - add support for Cypress TTSP touchscreen I2C bus interface
[PATCH v5 3/3] Input: cyttsp - add support for Cypress TTSP touchscreen SPI bus interface
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
email Follow the discussionReplies 4 repliesReplies Make a reply

Replies

#1 Javier Martinez Canillas
October 10th, 2011 - 03:00 pm ET | Report spam
On Mon, Oct 10, 2011 at 3:55 PM, Shubhrajyoti Datta
wrote:
Hello Martinez,
Some  small comments.





Hi Shubhrajyoti,

Thanks for the review.

On Sun, Oct 9, 2011 at 12:07 AM, Javier Martinez Canillas
wrote:

The driver is composed of a core driver that process the data sent by
the contacts and a set of bus specific interface modules.

Signed-off-by: Javier Martinez Canillas


v2: Fix issues called out by Dmitry Torokhov
   - Extract the IRQ from the i2c client data and pass to
cyttsp_core_init()

v3: Fix issues called out by Henrik Rydberg and Mohan Pallaka
   - Remove bus type info since it is not used.

 drivers/input/touchscreen/cyttsp/cyttsp_i2c.c |  190
+++++++++++++++++++++++++
 1 files changed, 190 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/touchscreen/cyttsp/cyttsp_i2c.c

diff --git a/drivers/input/touchscreen/cyttsp/cyttsp_i2c.c
b/drivers/input/touchscreen/cyttsp/cyttsp_i2c.c
new file mode 100644
index 0000000..146a16d
/dev/null
+++ b/drivers/input/touchscreen/cyttsp/cyttsp_i2c.c
@@ -0,0 +1,190 @@
+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2011 Javier Martinez Canillas

+ *
+ * Multi-touch protocol type B support and cleanups by Javier Martinez
Canillas
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
along
+ * with this program; if not, write to the Free Software Foundation,
Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com
+ *
+ */
+
+#include "cyttsp_core.h"
+
+#include <linux/i2c.h>
+#include <linux/slab.h>
+
+#define CY_I2C_DATA_SIZE  128
+
+struct cyttsp_i2c {
+       struct cyttsp_bus_ops ops;
+       struct i2c_client *client;
+       void *ttsp_client;
+       u8 wr_buf[CY_I2C_DATA_SIZE];
+};
+
+static s32 ttsp_i2c_read_block_data(void *handle, u8 addr,
+       u8 length, void *values)
+{
+       struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c,
ops);
+       int retval = 0;
+
+       retval = i2c_master_send(ts->client, &addr, 1);
+       if (retval < 0)
+               return retval;
+
+       retval = i2c_master_recv(ts->client, values, length);
+
+       return (retval < 0) ? retval : 0;



Trivial comment:
Could we check the bytes written ?
Feel free to ignore if you feel so.



Yes, you are right. I also think that I should check if retval =length and return an error code otherwise.


+}
+
+static s32 ttsp_i2c_write_block_data(void *handle, u8 addr,
+       u8 length, const void *values)
+{
+       struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c,
ops);
+       int retval;
+
+       ts->wr_buf[0] = addr;
+       memcpy(&ts->wr_buf[1], values, length);
+
+       retval = i2c_master_send(ts->client, ts->wr_buf, length+1);
+
+       return (retval < 0) ? retval : 0;
+}
+
+static s32 ttsp_i2c_tch_ext(void *handle, void *values)
+{
+       struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c,
ops);
+       int retval = 0;
+
+       /*
+        * TODO: Add custom touch extension handling code here
+        * set: retval < 0 for any returned system errors,
+        *      retval = 0 if normal touch handling is required,
+        *      retval > 0 if normal touch handling is *not* required
+        */
+       if (!ts || !values)
+               retval = -EINVAL;
+
+       return retval;
+}
+
+static int __devinit cyttsp_i2c_probe(struct i2c_client *client,
+       const struct i2c_device_id *id)
+{
+       struct cyttsp_i2c *ts;
+
+       if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+               return -EIO;
+
+       /* allocate and clear memory */
+       ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+       if (!ts) {
+               dev_dbg(&client->dev, "%s: Error, kzalloc.", __func__);
+               return -ENOMEM;
+       }
+
+       /* register driver_data */
+       ts->client = client;
+       i2c_set_clientdata(client, ts);
+       ts->ops.write = ttsp_i2c_write_block_data;
+       ts->ops.read = ttsp_i2c_read_block_data;
+       ts->ops.ext = ttsp_i2c_tch_ext;
+       ts->ops.dev = &client->dev;
+
+       ts->ttsp_client = cyttsp_core_init(&ts->ops, &client->dev,
client->irq);
+       if (IS_ERR(ts->ttsp_client)) {
+               int retval = PTR_ERR(ts->ttsp_client);
+               kfree(ts);
+               return retval;
+       }
+
+       dev_dbg(ts->ops.dev, "%s: Registration complete", __func__);
+
+       return 0;
+}
+
+
+/* registered in driver struct */
+static int __devexit cyttsp_i2c_remove(struct i2c_client *client)
+{
+       struct cyttsp_i2c *ts;
+
+       ts = i2c_get_clientdata(client);
+       cyttsp_core_release(ts->ttsp_client);
+       kfree(ts);
+       return 0;
+}
+
+#ifdef CONFIG_PM
+static int cyttsp_i2c_suspend(struct i2c_client *client, pm_message_t
message)
+{
+       struct cyttsp_i2c *ts = i2c_get_clientdata(client);
+
+       return cyttsp_suspend(ts->ttsp_client);
+}
+
+static int cyttsp_i2c_resume(struct i2c_client *client)
+{
+       struct cyttsp_i2c *ts = i2c_get_clientdata(client);
+
+       return cyttsp_resume(ts->ttsp_client);
+}
+#endif
+
+static const struct i2c_device_id cyttsp_i2c_id[] = {
+       { CY_I2C_NAME, 0 },  { }
+};
+
+static struct i2c_driver cyttsp_i2c_driver = {
+       .driver = {
+               .name = CY_I2C_NAME,
+               .owner = THIS_MODULE,
+       },
+       .probe = cyttsp_i2c_probe,
+       .remove = __devexit_p(cyttsp_i2c_remove),
+       .id_table = cyttsp_i2c_id,
+#ifdef CONFIG_PM
+       .suspend = cyttsp_i2c_suspend,
+       .resume = cyttsp_i2c_resume,
+#endif



How about moving to dev pm ops ?



Yes, I can move there.

Thank you for your comments, probably Henrik and others find issues
too. I will include these two in the next version of the driver.


+};
+
+static int __init cyttsp_i2c_init(void)
+{
+       return i2c_add_driver(&cyttsp_i2c_driver);
+}
+
+static void __exit cyttsp_i2c_exit(void)
+{
+       return i2c_del_driver(&cyttsp_i2c_driver);
+}
+
+module_init(cyttsp_i2c_init);
+module_exit(cyttsp_i2c_exit);
+
+MODULE_ALIAS("i2c:cyttsp");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C
driver");
+MODULE_AUTHOR("Cypress");
+MODULE_DEVICE_TABLE(i2c, cyttsp_i2c_id);
1.7.4.1

To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to
More majordomo info at  http://vger.kernel.org/majordomo-info.html







Best regards,

Javier Martínez Canillas
(+34) 682 39 81 69
Barcelona, Spain
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Similar topics